Optical Edition
HELIO^®Clean - Deduster Dryer

The dust is removed by air sifting with highly effective ion shower. During whirling/circulation in the deduster, a continuous stream of ionised air is sucked through the portion to be dedusted. In the process, the binding forces between dust particles and granules are reduced to such an extent that the dust is loosened and can be separated by air sifting. Due to the special glass construction, the ions are particularly durable and thus enable a high efficiency of the ion shower.

Sifter glass cleaning

The sifter glass is neutralized and cleaned with ionised air. The cleaning phase is made visually visible on the glass.

Tower drying bin in octagon construction

• octagonal inner container of stainless steel, fully insulated
• stiffening frame between inner tank and cladding
• powder-coated cladding sheet, very scratch-resistent
• optimal drying gas distribution
• viewing window

Viewing window

At the tower drying bin, the filling level can be continuously preselected between 2-10 liters or 4-20 liters by means of a sharable filling level sensor, depending on the throughput and the permissible dwell time.

Drying Process Control

• heating capacity 1,0 kw
• drying gas flow rate
    50 |   75 | 100 l/min  or
    60 |   90 | 125 l/min
• compressed gas-based drying gas dryer with patented HELIOS digital pneumatics
• drying temperature range 30-150°C
• quick selection button for 3 drying intensities A, B, C
• portion drying programm 1
• selection button for 10 functions
• weekly timer
• display of drying temperature and drying time SET/ACTUAL as well as     A,B,C, 1
• factory calibration with a calibration certificate for
  - 2 drying temperatures
  - 3 drying gas volume flows
  - 2 dew points
• overdrying protection depending on throughput
• conveying time control and
• material lack detection (Software)
• alarm lamp with potential-free contact
• dew point display down -50 °C

Deduster control

• dedusting portion
• air sifting
• sifter cleaning
• status display
• error messages
• time until ionizer maintenance
• reset to factory settings
• display of operating hours
• monitored forwarding of dedusted portion

Machine adapter

• stainless steel gate valve
• dust-tight construction
• clamping lever for slide rail

L-guide rails made of steel (nickel-plated) optionally available for sliding rails  [mm]: 80x15, 80x20, special measurements on request

Options:

• suction lance long 810 mm (instead of 380 mm)
• conveying hose set 5m (instead of 3m)
• dust collection container 16,5 liters (instead of 5,5 liters)